RCYA Series Pipeline Permanent Magnetic Iron Remover

RCYA Series Pipeline Permanent Magnetic Iron Removers are suitable for sites without conveyor belts, with low iron content in materials and only discharge chutes available.

聯(lián)系我們

產(chǎn)品介紹

Product Description

RCYA Series Pipeline Permanent Magnetic Iron Removers are suitable for sites without conveyor belts, with low iron content in materials and only discharge chutes available. They are mainly installed on discharge pipelines to remove ferrous impurities in industries such as cement, chemical, coal, plastic, refractory materials and building materials.

Structural Features

The equipment consists of three main parts: pipeline body, drive unit and magnet operating unit. The drive unit is mounted on the pipeline wall and drives the magnet operating unit inside the magnetic separation cavity via sprockets and chains. The permanent magnets attract ferrous contaminants mixed in materials and discharge them out of the pipeline through the iron outlet.

Working Principle

The iron remover is connected in series to material conveying pipelines with an inclination angle of 45-75 degrees. When materials pass through, ferrous substances are adsorbed onto the stainless steel pipe wall. They slide gradually towards the iron outlet following the movement of permanent magnets and get separated from materials. At the iron outlet, the permanent magnets move away along the circulating path, so ferrous substances lose magnetic attraction and are discharged by gravity, realizing automatic iron removal.

Features of RCYA Series Pipeline Permanent Magnetic Iron Remover

★ Adopt high remanence neodymium iron boron as magnetic source, featuring high iron removal efficiency and long service life.

★ Equipped with low-power cycloidal pin gear reducer motor and precision roller chain transmission. It has compact size, light weight, stable operation and low failure rate, bringing convenient operation and easy maintenance.

★ Reasonable and compact structure for easy installation, simply connect it in series with material conveying pipelines for use.

★ Continuous and automatic iron removal process, no on-site supervision required after startup.

★ Applicable to closed material conveying systems with no dust emission and no environmental pollution.

★ The pipeline wall is made of special wear-resistant material, which greatly extends the service life.

Application Scope

RCYA Series Pipeline Permanent Magnetic Iron Remover is a high-performance automatic magnetic separation device. It is widely used in cement, power, ceramics, brick & tile, chemical, food, glass, metallurgy, iron & steel and other industries for material purification and protecting subsequent equipment.

Technical Characteristics

Adopt magnetic gathering magnetic system and double-pole structure with high magnetic field strength and strong suction.

Large magnetic pole adsorption area ensures sufficient time to extract iron impurities from flowing materials.

Fully sealed pipeline structure with externally mounted iron remover to avoid wear during long-term continuous operation.

Compact size, light weight, easy installation, thorough iron removal and simple maintenance.

Main Technical Parameters of RCYA1

Model	Max. Capacity ≤T/h	Overall Dimension of Pipeline L×W×H mm	Dimension of Permanent Magnet L×W×H mm	Dimension of Flange Interface L×W×H mm	Inclination Angle to Ground	Weight kg	Applicable Materials
RCYA1-15	15	800×500×150	500×300×220	600×220	40°-50°	190	Lump Materials
RCYA1-30	30	950×600×170	600×400×240	700×230		240
RCYA1-50	50	1000×700×180	700×500×240	800×280		405
RCYA1-80	80	1100×750×200	800×550×240	900×300		790
RCYA1-100	100	1200×900×240	900×700×300	1000×320		1050
RCYA1-150	150	1300×1000×240	1150×650×320	1100×350		1280
RCYA1-200	200	1400×1100×260	1350×800×340	1300×380		1650
RCYA1-300	300	1600×1400×320	1550×1200×380	1500×400		2200

Main Technical Parameters of RCYA2

Model	Max. Capacity ≤T/h	Overall Dimension of Pipeline L×W×H mm	Dimension of Permanent Magnet L×W×H mm	Dimension of Flange Interface L×W×H mm	Inclination Angle to Ground	Weight kg	Applicable Materials
RCYA2-15	15	800×500×200	500×300×120(1) 500×70×30(2)	600×300	55°-75°	170	Powder Materials
RCYA2-30	30	900×600×250	600×400×140(1) 800×70×30(2)	700×350		250
RCYA2-50	50	1000×700×300	700×400×180(1) 700×70×30(2)	800×400		300
RCYA2-80	80	1100×800×300	800×500×200(1) 800×70×30(2)	900×400		710
RCYA2-100	100	1200×900×300	900×600×300(1) 900×70×30(2)	1000×400		950
RCYA2-120	120	1200×1000×300	1000×700×300(1) 900×70×30(2)	1100×400		1100
RCYA2-200	200	1200×1200×350	1200×900×350(1) 1200×70×30(2)	1300×450		1350